Loading

ONDU18 CURVED

Ondu 18 Curved profiled metal sheets are ideal for covering both the façade and roof of industrial, commercial, sporting or cultural buildings.

Metigla uses S 280 GD steel with minimum 275 g/m2 Zinc coating, offering high resistance to corrosion and a lifespan of over 50 years.

Technical information

  • Profile type
    ONDU18 Curved
  • Material
    Pre-painted steel sheet
  • Steel class
    S 280 GD
  • Available thickness (mm)
    0.45 | 0.50 | 0.60 | 0.75
  • Weight (kg/m²)
    5 - 7.5
  • Useful width (mm)
    988
  • Minimum - maximum length (mm)
    1500 - 13500
  • Corrugation (wave) height (mm)
    18
  • Minimum zinc coverage (g/m²)
    275
  • Exterior paint coating - Glossy (µm)
    Glossy Polyester 25
    PVDF 25
    PUR 55
  • Exterior paint coating - Mat (µm)
    Mat Polyester 35
    PUR Mat 50
  • ROOF PROFILE
  • Total width (mm)
    1050
  • Minimum slope (˚)
    7
  • FAÇADE PROFILE
  • Total width (mm)
    1050
  • Ondu18 Curved Roof (R) and Façade (F) - section

ONDU18 CURVED
COLORS

RAL 1014L

RAL 1023L

RAL 3000L

RAL 3005L

RAL 3009M

RAL 3011L

RAL 5010L

RAL 6009L

RAL 6011L

RAL 6020M

RAL 7016L

RAL 7024M

RAL 8004L

RAL 8004M

RAL 8017L

RAL 8017M

RAL 8019L

RAL 8019M

RAL 9002L

RAL 9005L

RAL 9005M

RAL 9006L

RAL 9007L

RAL 9010L

RAL 9016L

Steel type and structure

The raw material used by Metigla in the production process is hot galvanized steel (1), with a zinc protection of at least 275 g/m² (2).
The zinc coating is protected through multilayer technology with a passivated coating (3), primary protective coating (4) and paint layer (5).

The top protective layer (5) is available in following versions: Polyester (25 μm gloss or 35 μm mat), PVDF (polyvinylidene fluoride) of 25 μm, PUR (polyurethane) of 55 μm or PUR MAT (mat polyurethane) of 50 μm.

On the bottom side, the paint coating is 10 μm Polyester or Acrylic (6).

FINISHING PARTS

  • External ridge cap

  • Verge trim

  • Gutter

  • Gutter reinforcement

  • Outside corner trim

  • Low eaves closure

Contact request

Please fill in the form below and we will contact you as soon as possible.





By filling in the attached form, you agree to the storage and use of the information you have entered.